 STOPNET®
Pins projecting by 3 mm. Its small opening prevents the dropping of objects through the floor surface. The embossed transversal ribs with a gap of 80 mm improve the grip of the product.
Principal applications:
Floors, passageways.
The STOPNET® enhances safety in wet, slippery and misty environments.
It is recommended in all places where there are risks of slipping.
|
 STOPNET® STEP
On each side of the step, a double fold containing two stampings of 9 x 15, centre distance 130, allows direct fastening on the stringers. The off-centre boring enhances adherence to the nose of the step.
Principal applications: Straight staircases in wet, slippery or misty environments.
|
 STOPGLISS®
Circular relief Ø 27 embossed upwards in chequer-shaped pattern.
Principal applications: Zones with high risk of slipping, passages, staircases, decking.
|
 RHINOMIXTE®
Holes Ø 5/8 punched upwards. Holes Ø 16/23 punched downwards.
Principal applications:
Petroleum industries and greases.
|
 RHINOPLUS®
Punched split top with serrated surface.
Principal applications: All industries with high risk of slipping.
|
RHINODOWN®
Holes Ø 16/23 punched downwards.
Principal applications: Ventilated floors, storage areas.
|
 RHINOBERG®
Holes Ø 16/23 punched downwards.
Principal applications: Floors, decking, passageways.
|
 RHINODIAM®
Diamond points punched in diagonal lines.
Principal applications: Storage areas, warehouses.
|
 RHINOPIC®
Holes Ø 5/8 punched upwards.
Principal applications: Floors, inclined planes, industrial and logistics building.
|
 PRESSED FLOOR GRATINGS
Hot galvanised with T platings.
Obtained by assembling spacers inside support bars.
Principal applications: Floors, platforms, passageways, industrial buildings ad various infrastructures.
|
 ELECTROFORGED FLOOR GRATINGS
Hot galvanised without platings.
Obtained by electrical welding of twisted squares on supporting bars.
Principal applications: Floors, platforms, passageways for chemical and nuclear industries.
|
 PRESSED STEP NOTCHED
Hot galvanised.
Obtained by assembly of notched spacers inside support bars. Nose of step skid-proof with reinforced safety on the leading edge.
Principal application: All industrial skid-proof staircases
|
 PRESSED STEP FOR SAFETY
Hot galvanised.
Obtained by assembly of notched spacers inside support bars.
Nose of step skid-proof with reinforced safety on the leading edge. Sealed for balls of 20 mm.
Principal application: All skid-proof industrial staircases.
|
- Caillebotis
|
|
|
|
|
Floor gratings 
